Feline parvovirus (FPV) is a nasty feline virus that attacks the guts, immune system, and heart. FPV often causes severe illness (e.g., feline panleukopenia and feline infectious enteritis) and sometimes the death of cats.
The RIDX^® FPV Ag Test Kit is a lateral flow chromatographic immunoassay for the qualitative detection of FPV antigens in feline feces. This kit shows two letters which are the test (T) line and the control (C) line on the surface of the device. If the FPV antigen exists in the sample, it binds to the gold-conjugated FPV antibody. The antigen-antibody complex moves through the membrane by capillary force and responds to the FPV antibody on the test line, resulting in a red line. The control line indicates that the test is performed correctly and should appear when the test is complete.
The highly selective and sensitive two anti-FPV monoclonal antibodies to FPV are used as capture and detector in the kit. The RIDX^® FPV Ag Test Kit can detect FPV antigens in feline feces with high accuracy.

Feline feces

• RIDX FPV Ag test device (10 or 2 tests)
• Sample dilution buffer (10 or 2 vials)
• Disposable swab (10 or 2 ea)
• Disposable dropper (10 or 2 ea)
• Instructions for use (1 sheet)

• Sensitivity: 97.4% (76/78) vs. PCR
• Specificity: 98.4% (123/125) vs. PCR
• Diagnostic Agreement: 98.0% (199/203) vs. PCR
• Limit of Detection: 1x10^5.5 TCID₅₀/mL
• No cross-reactivity with other feline pathogens (FCV, FCoV, FeLV, E. coli, Giardia, and Salmonella)

• 10 Tests/Kit [CGM-FPG-11]
• 2 Tests/Kit [CGM-FPG-12]

1. All reagents and samples must be at room temperature (15~30℃/59~86℉) before use.
2. Collect fecal samples using a swab.
3. Put the swab into the sample dilution buffer and stir the solution with the swab to disperse the sample into the buffer (approximately 10 seconds).
4. Remove the swab from the sample dilution buffer.
5. Wait for 20 seconds to settle down the large particles.
6. Remove the test device from the pouch and place it on a flat and dry surface.
7. Take the supernatant of the sample solution in the tube by using a disposable dropper.
8. Apply 4 drops of the sample solution into the sample hole (S) on the device, drop by drop vertically.
9. Read test result at 10 minutes.